Publicidad
Idiomas disponibles
Idiomas disponibles
get
ready
Unpack the box
Chair
Seat Pad
1. Unfold the chair
Remove all packaging materials from the
chair. Pull up on the backrest to unfold the
chair to an upright position. The backrest
locks into place automatically.
www.humantouch.com
Backrest Pad
Head Pillow
2. Install the backrest pad
Remove the fabric strip from the hook and loop fastener
on the backrest pad. Attach the backrest pad to the
backrest using the hook and loop fasteners on all three
sides of the backrest and backrest pad.
Smooth the two flaps on the bottom of the backrest pad
under the bottom of the backrest. The flaps attach to the
backrest using the hook and loop fasteners.
6
Your Human Touch
simple assembly (no tools required). Just install
the backrest pad, the seat pad and the head
pillow, and you're done!
3. Power on
Plug the power cord into a grounded 110-volt power source.
Turn the master power switch (on the bottom center of the
chair back) to On.
4. Install the seat pad
Use the remote control Leg Up setting to raise the footrest to a horizontal position. Pull up
on the footrest release handle, located on the right-hand side of the footrest, then rotate the
footrest away from the chair until it is in a vertical position.
Attach the seat pad to the seat, using the hook and loop fasteners. Wrap the flap on the front
of the seat pad around the chair frame and attach it to the top of the chair frame using the
hook and loop fasteners.
5. Install the head pillow
Attach the head pillow to the two straps on the back
of the chair using the hook and loop fasteners. Adjust
the head pillow height for maximum comfort.
massage chair
requires some
™
7
Publicidad
