Publicidad
Idiomas disponibles
Idiomas disponibles
customize massage
The massage-softening pad softens the massage intensity.
For a stronger massage, remove the massage-softening pad.
1. Flip the head pillow over to the back of the chair.
2. Detach the top of the backrest pad hook and loop strip from the chair.
3. Open the horizontal zipper on the back of the backrest pad.
4. Insert or remove the massage-softening pad as desired.
5. Close the zipper.
6. Attach the top of the backrest pad to the chair using the hook and loop fasteners.
7. Flip the head pillow over to the front of the chair.
Replacement massage-softening pads are available from Human Touch
www.humantouch.com
intensity
To experience the full power of
Human Touch
just remove the
™
massage-softening pad from
your chair. But keep it handy,
in case you want to replace it
in the future.
™
, for an additional charge.
12
care and
maintenance
To keep your product working and looking its best, please follow
these simple care guidelines.
1.
Be sure to disconnect the power cord from the electrical outlet before cleaning.
2.
Do not use benzene, thinner or any other solvents on your massage chair.
3.
Remove dust on the backrest or armrest with a vacuum.
4.
If the backrest or a armrests become soiled, wipe with a damp cloth, then a dry cloth.
5.
Common upholstery cleaners may be used for tough stains.
6.
When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to
clean the controller or power switch.
7.
It is suggested that you cover the chair when not in use for a long period of time.
8.
The mechanics of this product are specially designed and constructed to be maintenance free.
No periodic lubrication or servicing are required.
9.
Foreign objects should not be inserted between the massage nodes or the unit housing.
10. When not in use for a long period of time, we recommend that the power cord be coiled and that the unit be
placed in an environment free of dust and moisture.
11. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods
of time. This may cause fading or damage.
WARNING:
This product is equipped with a thermal resetting protection device. This is an added safety feature
to protect you and this product from overheating. If the product should suddenly stop and will not start, turn the
main power switch, located on the back of the product, off and do not operate the product for at least 30 minutes.
Failure to turn the product off may result in the product starting unexpectedly when the device cools.
13
Publicidad
