Elebia evo2 Manual De Usuario página 10

10
eINST
The evo automatic lifting hook can also be controlled using a
free channel of the crane's master control. The eINST remote
control has to be placed in the crane relay cabinet, where only
simple wiring is needed. It may be used by pairing to a free chan-
nel of the crane's master control. It is compatible with all cranes.
The eINST remote control can block the upward movement of
the crane when the evo automatic lifting hook is in intermediate
position.
Available as 24 V DC or 48 V DC
Dimensions: 80 x 140 x 45 mm. / 3.15 x 5.51 x 1.77 in.
For more information on the eINST remote control, please refer to
the eINST remote control user manual
(downloadable from https://elebia.com/downloads/)
eMAX
The eMAX is our most advanced remote control. It displays
all the info in a big high-resolution screen and a high-profile
keypad, yet remains handy and lightweight.
For more information on the eMAX remote control,
please refer to the eMAX remote control user manual.
(downloadable from https://elebia.com/downloads/)
FCC, IC, CE & ARIB
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmit-
ter, except in accordance with FCC multi-transmitter product procedures.
Any changes or modifications not expressly approved by the warranty of this device could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver.
Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.