Elebia evo2 Manual De Usuario página 5

7. DO NOT operate the evo automatic lifting hook if it has not been properly secured.
8. DO NOT lift nor pull more than the working load limit that is indicated per evo automatic lifting hook
and which is included in the CE stamp.
9. DO NOT use the evo automatic lifting hook to lift, sustain or transport people.
10. DO NOT lift loads over people and ensure that people remain at a safe distance from the load.
11. DO NOT operate the evo automatic lifting hook unless all people are, and remain outside, the area of
the sustained load.
12. DO NOT operate the evo automatic lifting hook if there are people touching or manipulating it.
13. DO NOT lift loads unless the load slings, chain slings, or other lifting accessories are of the correct size
and suitably fastened to the evo automatic lifting hook.
14. DO NOT operate the evo automatic lifting hook with twisted, tangled, damaged or worn load slings,
chain slings or other means and/or lifting accessories.
15. DO NOT place or lift the load on the tip nor the safety mechanism of the evo automatic lifting hook.
16. DO NOT use the evo automatic lifting hook's magnet to lift loads. The sole function of the magnet is
to attract and align the sling, metal ring or lifting accessory.
17. DO NOT lift loads that are unbalanced or not secured or if the load is not suitably fastened. Any slack-
ness must be carefully tightened.
18. DO NOT leave the weight sustained on the evo automatic lifting hook unattended unless specific
precautions have been taken.
19. DO NOT attempt to open the evo automatic lifting hook with a suspended load.
20. DO NOT allow the use of the evo automatic lifting hook to make electrical or earth contact in welding
operations.
21. DO NOT allow the evo automatic lifting hook or lifting chains to be touched by a live welding electrode.
22. DO NOT withdraw nor cover the warning signs of the evo automatic lifting hook.
23. DO NOT operate the evo automatic lifting hook if it lacks its safety signs or if they are illegible.
24. DO NOT operate the evo automatic lifting hook if it is not in a vertical position.
25. DO NOT modify the evo automatic lifting hook (by welding, grinding, etc.), as this can adversely
affect its operation and safety.
26. Provide notification of any malfunction or abnormal performance of the evo automatic lifting hook
after it has been disconnected for its repair.
27. The evo automatic lifting hook must be stored clean and in a non-humid area to protect against corrosion.
28. DO NOT store the evo automatic lifting hook with the battery inserted.
Restrictions
· Influences resulting from temperature
The evo automatic lifting hook has been designed to be used in normal atmospheric conditions and in a
temperature range from -20 ºC to 60 ºC / -4 ºF to 140 ºF. The evo automatic lifting hook must not be used if
these conditions are not met.
· Influences from acids/alkalines and chemicals
The evo automatic lifting hook must not be exposed to acids/alkalines or their vapours, as certain pro-
duction methods may release acids and/or vapours.
Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
5
EN