Elebia evo2 Manual De Usuario página 9

Remote Controls
The patented evo automatic lifting hook can be paired to the eMAX remote control, the eMINI remote
control and/or the eINST installable remote control.
eMINI
The eMINI is a small and compact remote control. With
the eMINI remote control, the operator can
open and close the evo automatic lifting hook and
control its battery level. The eMINI also displays
sensor information and maintenance messages.
For more information on the eMINI remote control,
please refer to the eMINI remote control user manual
(downloadable from https://elebia.com/downloads/)
Working Modes
The remote can work in 2 different modes:
> "One button" mode:
"elebia" button: locks and unlocks the evo
automatic lifting hook
> "Two buttons" mode:
"elebia" button: locks the evo automatic lifting hook
"Mode" button: unlocks the evo automatic lifting hook
To switch between modes, press and hold the
"elebia" button for 10 seconds.
Power Supply
Available Code Combinations
Detection of Errors in Transmission
Buttons
Frequency Selection
Frequencies
Communication
Radiated Power
Antenna
Range
Working Temperature
Dimensions
Disclaimer: This user manual is for informational purposes only. The manufacturer reserves the right to modify its specifications without prior notice.
"Mode" Button
Display Information
"elebia" Button
Display Information
0 to 9: Battery level of the evo automatic lifting hook
A: Low battery level of the eMINI remote control
C: Maintenance review of the evo automatic
lifting hook
1b: "One button" mode
2b: "Two buttons" mode
b: The eMINI remote control does not detect the
evo automatic lifting hook
- battery is not inserted
- battery is off
- battery is discharged
One 3V lithium battery (CR2032)
65,536 different combinations
2 CRC bytes + Forward Error Correction
2
1
868 MHz / 924.1 MHz
Bi-directional return of receiver battery status
Under 5 dBm
Printed circuit
100 metres / 330 Feet
-20 ºC to 85 ºC / -4 ºF to 185 ºF
Minitel box (68 x 52 x 17 mm. / 2.68 x 2.05 x 0.67 in.)
9
EN