Rohde ST 310 Instrucciones De Uso página 50

2.4. Overview of the device
2.4.1. Overview of the control unit
No. Description
1 USB port
2 "USB flash drive inserted into USB port" indicator light
3 "Kiln heating" indicator light (an orange picture element flashes in the display)
4 Icons: "Temperature (°C)", "Ramp rate/cooling rate (°C/h)", "Time (h.min)"
5 "Data transmission" indicator light
6 Overview of program sections (for an explanation, see the following section)
7 "Program running" indicator light
8 Start/stop key
Increase value
9
(additional function: "program advance function" by holding down the key for 3 seconds)
10 Jump forward/advance
Decrease value
11
(additional function: "program pause function" by pressing the key while the program is running)
12 Mains switch
13 Cable with CPC 14 connector (connection to the kiln)
14 Fuse
15 Jump back/back (additional function: "info key")
16 Key for selecting the program memory
17 Main display
1 2
3 1 0 .
17
16
15
14 13
48 / 293 - EN -
3
4
6
7
9
11
12
5
8
10