ALFRA AHP-M1 Manual De Instrucciones página 17

EN
dear customer,
We thank you for choosing our Alfra product. Read these operating instructions carefully before using your
new unit for the first time and retain them together with the supplied Product Control Card so they can be
consulted when required.
1. ce laBel
ALFRA confirms the conformity of the electro-hydraulic pump with the machine directive 2006/42/EC and
with the EMC directive 2014/30/EU. An appropriate declaration of conformity has been issued. This can be
found at the end of this document, or it accompanies the unit as a separate document.
2. saFety instructions
2.1 symbols in these operating instructions
The following symbols are used in this documentation:
warning!
!
hazardous situation that may lead to death or serious injury
if the instructions are not followed.
!
caution!
hazardous situation that may lead to (minor) injuries if the instructions are not followed.
note:
important notes and indications for situations that may result in material damage..
This symbol indicates an "action point" and shows that you should perform an operation or procedure.
2.2 symbols on the pump
The following symbols are placed on the pump.
observe the operating instructions.
wear safety goggles and ear muffs.
45°C
-5°C
equipment temperature..
113°F
23°F
17