PURE Contour 200i Air Manual De Instrucciones página 16

Using Contour Setup Manager
Introduction
Contour features a Setup Manager. The Setup Manager allows you to change various Contour
settings and view Contour's status. You can also use Setup Manager to carry out a firmware
update if a previous update failed and you do not have access to the internet. You can access
Contour Setup Manager after you have established a connection between your computer and
Contour. Most people will only need to use Contour Setup Manager when they are initially setting
up Contour using the temporary wireless connection (see "Stage 3: Accessing Contour Setup
Manager" on page 9 for information on how to access Contour Setup Manager using a
temporary wireless connection).
Note: If you are connected to Contour with a router, you will need to find out what IP address has
been allocated to Contour by your router and enter this into the address field of your web browser.
Consult your router documentation for more information on how to find out the IP address that
has been allocated to Contour by your router.
Menu structure
The Contour Setup Manager menus are accessed by clicking tabs at the top of the window. The
number of tabs available in Contour Setup Manager varies depending on whether Contour is
being accessed using a wireless or wired connection. If accessing Contour Setup Manager using
a wireless connection, three tabs are visible. If accessing Contour Setup Manager with a wired
connection, four tabs are visible.
The available tabs are:
Connection
Advanced
Status
Update
16
The Connection tab is used to configure Contour's wireless settings.
The Advanced tab opens the Manual Network Setup page.
The Status tab opens the Status Information page. This page displays
information about the firmware and the wireless connection status.
The Update tab opens the Firmware Update page. This page allows you to
update the firmware manually (only visible during wired setup).