PURE Contour 200i Air Manual De Instrucciones página 8

Preparing Contour to use
AirPlay with Wi-Fi
Introduction
There are five stages in preparing Contour to use AirPlay if you are connecting Contour to your
network with a wireless connection. Skip this section if you are using the wired connection
method (see page 11).
1. Prepare Contour for wireless setup.
2. Create a connection between Contour and your setup device (any device with Wi-Fi and a
browser, such as an iPhone or laptop), by using a temporary wireless network.
3. Access Contour Setup Manager.
4. Assign Contour a unique name.
5. Add Contour to your wireless network.
Stage 1: Prepare Contour for wireless setup
1. Position Contour in range of your
wireless network.
2. Insert the connector of the mains
power adapter into the socket on
the rear of Contour.
3. Plug in to the mains supply.
4. When the red Status LED on the front has stopped flashing, Contour is in Sleep mode.
8
Typical wireless setup
18V DC