Husqvarna 253RB Manual Del Usuario página 15

H1153433-10,253RB,GB.fm Page 15 Friday, February 26, 2010 9:55 AM
Fitting the transport guard
• Insert the blade in the transport guard (A).
• Snap the two fasteners (B) into the slots (C) to secure
the transport guard.
Adjusting the harness and brush
cutter
Adjusting the backplate height
• Loosen the two fasteners holding the backplate.
ASSEMBLY
• Loosen the backplate from the frame on one side.
• Move the backplate to the desired height and fasten it.
Make sure the pin aligns with one of the holes on the
frame, see picture.
Adjusting the harness
• Put on the harness.
• Tighten the waist strap so that it sits securely.
–
English 15