Publicidad
Idiomas disponibles
Idiomas disponibles
Unsuitable Installation
Poorly ventilated
Highly heated and humid
Very dusty
34
(GB)
All manuals and user guides at all-guides.com
Do not install the projector in the following situations. These installations
may cause malfunction or damage to the projector.
• Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes. When the internal heat
builds up due to the block-up, the temperature sensor will
function with the message "High Temperature! Power off
in 1 min." The power will be turned off automatically
after one minute.
• Leave space of more than 30 cm (11
the unit.
• Be careful that the ventilation holes may inhale tininess
such as a piece of paper.
• Avoid installing the unit in a location where the
temperature or humidity is very high, or temperature is
very low.
• To avoid moisture condensation, do not install the unit in
a location where the temperature may rise rapidly.
Avoid installing the unit in a location where there is a lot of
dust; otherwise, the air filter will be obstructed. The dust
blocking the air through the filter may cause raising the
internal heat of the projector. Clean it up periodically.
7
/
inches) around
8
Publicidad
