Philips SRU 7060/10 Guía De Usuario página 6

Instructions for use
All manuals and user guides at all-guides.com
4
Then keep keys 1 and 3 pressed
simultaneously for three seconds until the
light around the Standby key blinks twice and
then remains lit.
5
Enter the code noted in step 2, using the digit keys.
– The light will now blink twice.
If the light blinks once for an extended period, the code has not been
entered properly or the wrong code has been entered.
Start again from step 2.
6
Point the SRU 7060 at the TV and check that it responds as it should.
– If the TV responds to all of the key commands, the SRU 7060 is ready
for use. Do not forget to note your code.
• If the device does not respond at all, or not to all of the key
commands, start again from step 2 and try the next code from
the list.
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 y Standby. . . . . . . . . switches the remote control on or off.
2 LEARN . . . . . . . . . . . switches the SRU 7060 in programming or
3 MENU . . . . . . . . . . . . turns the menu on and off.
4 Cursor ring . . . . . . . cursor up, down, left and right in a menu.
5 AV . . . . . . . . . . . . . . . . selects external Audio/video input(s).
6 - a + . . . . . . . . . . . . . Volume up / down of TV or Amplifier.
7 Digit keys
8 SHIFT . . . . . . . . . . . . for extra functions. When pressed at the same
SHIFT + 2:. . . . . . . . record;
SHIFT + 5: . . . . . . . previous track;
SHIFT + 6: . . . . . . . next track;
SHIFT + BACK:. . . system menu (DVD).
9 5 . . . . . . . . . . . . . . . . . VCR/CD/DVD: rewinds the tape or disc.
0 9 . . . . . . . . . . . . . . . . . VCR/CD/DVD: stops the tape or disc.
! 2 . . . . . . . . . . . . . . . . . VCR/CD/DVD: play tape or disc.
@ ; . . . . . . . . . . . . . . . . . . VCR/CD/DVD: pause.
# 6 . . . . . . . . . . . . . . . . . VCR/CD/DVD: winds the tape or disc.
6
learning mode.
– direct choice of channels and other functions;
– source selection in AMP (amplifier) mode.
– source selection in AMP (amplifier) mode. Press
the SHIFT-key together with the desired Source
key (TV, DVD,VCR,TUNER, CD, AUX,TAPE,
VCR2).
time as a second key, the second key will get
another function. For example:
Try out other combinations with the SHIFT-key on
your appliance in order to find out which functions
are available. Only functions featured on the
original remote control are available.
TV/STB/CBL: red fasttext key.
TV/STB/CBL: green fasttext key.
SHIFT+2: record.
TV/STB/CBL: white fasttext key.
TV/STB/CBL: yellow fasttext key.
TV/STB/CBL: blue fasttext key.