Instructions for use
All manuals and user guides at all-guides.com
4
Press the key under which you want to
store the macro, e.g. the P
Notes:
–
Once a macro is stored under a key, the original
function of the key can not be used anymore.
–
You can also store the macro by pressing Shift in
combination with a target key (the target key keeps its original function).
–
You cannot store a macro under the SELECT, LEARN or SHIFT key.
5
Enter the sequence of keys to be stored, e.g.:
•
Select DVD mode with SELECT key and press the Standby key.
•
Select TV mode with SELECT key and press 1.
•
Select AMP mode with SELECT key and press the Standby key.
Select DVD mode with SELECT key and press 2.
•
6
To close the macro press the LEARN key.
–
The DVD label blinks twice to confirm.
•
If you now select DVD mode and press
(
the P
P key, the remote will switch on the
DVD, the TV and the AMP and starts playing
the disc.
Learn a key
If you miss certain functions from your original remote control of the
SRU 7060, the SRU 7060 can learn these functions from the original remote.
You can store a fuction under any of the available keys of the SRU 7060,
except LEARN, SELECT and SHIFT. Please, note that any function already
stored under a key will be deleted.
Example for VCR:
Make sure you have the original VCR remote control at hand.
1
Select the device mode VCR, with the
SELECT key.
2
Press the LEARN key and the target key on
the SRU 7060 simultaneously for 5 seconds,
until the VCR label blinks twice and remains lit.
3
Place both remote controls on a flat surface
(like a coffee table) and aim them head-to-
head with about 10cm in between.
4
Press the button you want to copy on the original remote control.
–
If the SRU 7060 has learned the code, the VCR label will blink twice to
confirm the signal is stored.
–
If the VCR light blinks once for a longer period, the IR signal is not
learned by the SRU 7060. Please, try a few times and make sure the
remotes are aligned as described in step 3.
8
(
P key.