Descargar Imprimir esta página

Glacier bay HD873X-0904 Guía De Uso Y Mantenimiento página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation (continued)
11
Checking for leaks
Turn the handle (F) to the full on mixed position.
Allow the water to ow from the shower arm (B)
outlet for one minute, or until all foreign matter
has been ushed out. Check for leaks.
Shut off the water at the faucet and supply lines.
12
Installing the shower head
Attach the shower head (C) to the shower arm
(B). Hand-tighten only.
NOTE: Do not use the thread sealant tape and do not use
wrench to tighten shower head. If the screen lter (1) in
the spray head (C) is blocked, turn off the water supply at
angle valve and unscrew the spray head (C) from spray
arm (B). Clean the screen lter (1) in the spray head (C)
under running water with brush (2, not included).
Care and Cleaning
To clean, wipe down with a damp cloth and dry with a towel.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
B
F
B
C
14
D
2
C
1

Publicidad

loading