Care And Maintenance; Battery Replacement; Troubleshooting; Declaration Of Conformity - TFA 60.4508 Instrucciones De Uso

TFA_No. 60.4508_Anleit_10_13 16.10.2013
Radio-controlled wall clock with automatic backlight

10. Care and maintenance

• Clean your instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries and pull out the plug of the socket, if you do not use the product for a long
period of time.
• Keep the instrument in a dry place.

10.1 Battery replacement

• Change the three 1,5 V C batteries when the backlight becomes weak.
• Change the two 1,5 V AA batteries, when the battery symbol appears on the display.
• Fold in the stand.
• Open the battery compartment and insert the new batteries.
• Make sure the polarities are correct.
• Close the battery compartment again.

11. Troubleshooting

Problems Solutions
➜ Ensure that the battery polarity is correct (2 x 1,5 V AA)
No display on the device
➜ Change the batteries
➜ Press and hold ▼/°C/°F button for three seconds to activate the
No DCF reception
reception
➜ Choose another place for your product
➜ Wait for attempted reception during the night
➜ Check if there is any source of interference
➜ Restart the device according to the manual
➜ Manual clock setting
➜ Change the batteries (2 x 1,5 V AA)
Incorrect indication
➜ Use a pin to press the RESET button
➜ Slide the switch ON/ECO/OFF to the right position
No backlight / night lighting
➜ Change the batteries (3 x 1,5 V C)
➜ Ensure that the battery polarity is correct
➜ Check the adaptor (optional)
➜ Check whether shadow or light affect the light sensor
If your device fails to work despite these measures contact the supplier from whom you purchased it.
12. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
Never dispose of empty batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to an appro-
priate collection site depending on national or local regulations in order to protect the en-
vironment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labeled in accordance with the EU Waste Electrical and Electronic Equip-
ment Directive (WEEE).
Please do not dispose of this instrument in household waste. The user is obligated to take
end-of-life devices to a designated collection point for the disposal of electrical and elec-
tronic equipment, in order to ensure environmentally-compatible disposal.
14
11:35 Uhr Seite 8
Radio-controlled wall clock with automatic backlight
13. Specifications
Power consumption:
Backlight: Batteries 3 x 1,5 V C (included)
Multi-function power supply with
the adjustment to 4,5 volt (not included)
Power consumption:
Clock function: Batteries 2 x 1,5 V AA (included)
Temperature range: -10°C ...+50°C / +14 °F...+122 °F
Indication LL.L / HH.H: Temperature is outside measuring range
Housing dimension: 230 x 31 (80) x 185 mm
Weight: 530 g (instrument only)
TFA Dostmann GmbH & Co. KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time
of going to print and may change without prior notice.

DECLARATION OF CONFORMITY

Herewith we declare, that this wireless transmission device does comply with the essentials requirements of R&TTE Directive
1999/5/EC.
A copy of the signed and dated Declaration of Conformity is available on request via info@tfa-dostmann.de.
www.tfa-dostmann.de 10/13
15