Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
-
Use the spanner (S12) to tighten the screws until they are securely fastened. Fig. 5
Attention
Make sure the bolts in step 1 are securely tightened.
Step 5. Installing the dumbbell rack
5A. Fit the bar trims (E) and fix the cross bars (D) to the left and right front support bars. Insert
the screws (S8) on both sides and tighten them halfway with the Allen key (S11) provided.
5B. Attach the dumbbell rack (F) to the cross bars (D) with two hexagonal bolts (S9) and two
locknuts (S10).
5C. Use the Allen key (S11) and the spanner (S12) to tighten the bolts and screws until they are
securely fastened. Fig. 6
4. OPERATION
Attention
Always stand on the side rails when starting the treadmill; never start the treadmill while
standing on the walking belt.
Quick Start
Press the START button on the console to begin the training session. The treadmill shall start
moving with an initial speed of 1 km/h. You can press the SPEED + or SPEED - on the console to
increase or decrease speed during training.
During the training session, you can press the STOP button on the console to finish the training
at any moment.
Button functions
START
Press the START button to start training in a different training mode.
STOP
Press the STOP button to stop training in a different training mode.
PROG
Press the PROG button to select a pre-set training programme mode (P01-P12).
MODE
Press the MODE button to select different functions (time, distance, or calories) to set
personalised training targets using the manual mode.
58
DRUMFIT WAYHOME 1800 RUNNER SPRINT
Publicidad
