•
When you press the power button, the aerofryer will start the
corresponding program. When you have chosen the wrong
program, you can abort by pressing the power button again. The
device will stop after 20 seconds. After this you can select
another function. It is also possible to adjust the chosen program
by changing the time and temperature.
•
The time can be adjusted with the timer control buttons. Press
the timer control buttons one time to increase or decrease the
frying time by one minute. Press and hold one of the buttons to
adjust the time faster. You can set the timer between 1 and 60
minutes.
•
The temperature can be adjusted with the temperature control
buttons. Press the temperature control buttons one time to
increase or decrease the temperature by 5 degrees. Press and
hold one of the buttons to adjust the temperature faster. You can
set the temperature between 80 and 200 degrees.
•
It is also possible to start the device without selecting a function.
Set the time and temperature with the timer and temperature
control buttons, then press the power button.
•
When you pull out the pan during the frying process, the device
will shut off automatically. When you reinsert the device, the
program will resume.
•
To cancel any program, press the power button. The device will
shut off after 20 seconds.
•
During the hot air frying process, the heating-up light will blink
while heating, the heating-up light will stay on continuously during
the cooling down period.
•
Excess oil from the ingredients is collected on the bottom of the
pan.
•
Some ingredients require shaking halfway through the
preparation time. To shake the ingredients, pull the pan out of the
appliance by the handle and shake it. Then slide the pan back
into the air fryer. Do not press the basket release button during
shaking
•
When you hear the timer beep, the set preparation time has
elapsed. The device will shut off after 20 seconds. Pull the pan
out of the appliance and place it on a heat-resistant surface.
•
Check if the ingredients are ready. If the ingredients are not
ready yet, simply slide the pan back into the appliance and set
the timer to a few extra minutes.
•
To remove small ingredients (e.g. fries), press the basket release
button and lift the basket out of the pan. Do not turn the basket
upside down with the pan still attached to it, as any excess oil
that has collected on the bottom of the pan will leak onto the
ingredients.
•
Empty the basket into a bowl or onto a plate. When a batch of
ingredients is ready, the air fryer is instantly ready for preparing
another batch.
Tips
•
Shaking smaller ingredients halfway during the preparation time
optimizes the end result and can help prevent unevenly fried
ingredients.
•
Add some oil to fresh potatoes for a crispy result. Fry your
ingredients in the air fryer within a few minutes after you've added
the oil.
•
Do not prepare extremely greasy ingredients such as sausages
in the air fryer.
Instruction manual
EN
7