Chauvin Arnoux MH 60 Manual De Instrucciones página 23

The clamp is powered either from the internal storage battery or from an external 5 VDC
supply connected to the Type B µUSB connector.
4.1. Recharging of the internal storage battery
4.2. Cables
Find Quality Products Online at:
3.4.2. Operation with the USB supply
The clamp is "OFF". Connect the USB.
The storage battery charges
charging, this LED remains lit.
The clamp is "ON". Connect the USB, the storage battery is in permanent
trickle charging
Power supply:
Life between charges:
Type:
Life:
Nr. of recharging cycles:
This type of storage battery can be procured from CHAUVIN ARNOUX.
Power supply: from the Type B µUSB connector.
Max. consumption (with storage battery charging): <170mA
The internal storage battery can be recharged in the presence of an external
power source, with the clamp off.
A complete charging cycle lasts approximately 10 hours.
If the clamp is in operation, only a trickle charge is applied, so the storage battery
keeps its charge, but it is not recharged in this case.
Output: BNC coaxial cable 2m long
Power supply: the power supply cable, 30cm long, has a female Type B µUSB
connector.
GlobalTestSupply
www.
blinking every second; at the end of
the LED is lit permanently.
from the internal storage battery
from 7 to 8 hours of non-stop operation
1 1.2V NiMH AAA cell with soldered lug, connected by
connector
2 years minimum
300
22
Oscilloscope clamp
.com
sales@GlobalTestSupply.com