Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
•
timing again.
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All packaging should
be sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
USE
Camshaft Alignment Tools (1)
Flywheel Locking Tool (3)
Timing Chain Pre-Tensioning Tool (5)
(left cylinder bank)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Timing Chain Pre-Tensioning Tool (5)
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Crankshaft Timing Pin (2)
Camshaft Turning Tool (4)
(right cylinder bank)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
