Publicidad
Idiomas disponibles
Idiomas disponibles
blender is running.
8. When finished press
(pulse/stop) to stop blending (E). Make sure
blades have completely stopped before
attempting to remove the blending jar from
the base. (Refer to troubleshooting for any
issues).
9. Press
(on/off) to power off. Unit will auto
shutoff after 60 seconds without use.
10. To remove the jar, grasp the handle and lift up.
11. Remove lid to pour.
12. Always unplug the appliance when not in use.
US IN G THE P ER S O N A L BL EN D E R JAR
Note: Do not blend hot liquids in the personal jar.
1.
Place the personal blender jar on a flat surface with the open end facing up.
Fill the jar with ingredients. Do not fill ingredients past the "20oz." marking.
Note: For best results, add ingredients in the following order:
a.
Liquids
b.
Ice
c.
Hard Foods
d.
Soft Foods
e.
Powders
2.
Tighten the personal jar blade assembly on the open end of the personal
jar with the blade facing down towards the ingredients. It is important to
tighten to prevent leaking during blending.
3.
Turn personal jar upside down and place on the blender base, turning
clockwise to lock into place.
4.
Select the appropriate speed or use
IMPORTANT: It is recommended to only use speeds 1-3 or
the personal jar.
5.
Once blending has finished, remove the personal jar by turning counterclockwise
(on/off) or
/
(pulse) to blend to desired consistency.
16
5
PROG
3 when using
Publicidad
