HOMCOM 800-166V70 Manual De Instrucciones página 10

4.2 Changes during the double pots working process
4.2.1. If the two pots are cooking and you need to change the time or temp for pot 1, press
– the recipe cannot be changed in this state. If there is no operation for 10
seconds after changes, the screen returns to normal.
4.2.2. For changing the temperature or time of pot 2, refer to 4.2.1.
4.2.3. When cooking, the recipe, temperature and time can be adjusted after pressing
or and the power key. Pot 1 or 2 will pause – press the power key to resume
cooking after changes.
4.2.4. When paused, if there is no operation after five minutes, the pot will enter standby.
4.3 Turning off pot 1 or pot 2
4.3.1. Press or
will stop working and enter standby.
4.4 Taking out the pot
4.4.1. If a pot is removed during cooking, the screen will display 'OPEN' and the heating
and motor will stop. Once the pot is placed back in, the appliance will continue
working with its previous settings. A frying pot can be removed and loaded without
affecting the work of the other pot.
4.4.2. If the pot is removed while on standby, the screen will display 'OPEN' – the pot
cannot be used.
4.5 Pausing both pots
4.5.1. When both pots are cooking, press the power key once to pause – both screens
and recipes will flash. Press the power key again to resume cooking.
4.5.2. If both pots are on pause and there is no operation for five minutes, they will stop
working and enter standby.
4.5.3. When both pots are cooking, gently press the power key once to pause. If you need
to adjust, press
according to your needs. Once changes are complete, press the power key once to
resume cooking.
4.5.4. When both pots are cooking, gently press the power key once to pause, then hold
the power key for two seconds to turn them off – the left and right screen will display
'OFF'. The appliance will enter standby after the beep.
4.6 Stop the 2 pots
4.6.1. When both pots are cooking, hold the power key for two seconds to stop them – the
left and right screens will display 'OFF'. After the beep, the machine will enter
standby.
4.6.2. Operation in both pots will stop after the display time ends. The heating and motor
will stop working and the screen will display 'OFF'. After the buzzer beeps five
times, the machine will enter standby.
4.6.3. If you want to turn off just one pot, press
two seconds. The selected pot will stop working and the screen will display 'OFF'.
After the beep, it will return to standby. At this point, only one pot will work.
4.7. Simultaneous end function
4.7.1. This function only works when two recipes with different times are selected.
first, then hold the power key for two seconds. The selected pot
or , then change the recipe, temperature or time
10
or , then hold the power key for