Descargar Imprimir esta página

HOMCOM 824-012V90 Manual Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

MODE
Press the button of ON/OFF (7) , to power on the appliace.
Press the button of MODE (5), to select the fan mode.
3 mode for select: (NORMAL / NATURE / SLEEP).
The default mode is NORMAL, and the SLEEP/NATURE mode with the
indicator be light up.
TIMER (0.5 - 7.5 HOURS)
Press the button of ON/OFF (7) , to power on the appliace.
Press the button of
Hours)
It will now remain in operation until the selected period of time runs out.
After the timer runs over , the device will turn off.
OSCILLATION
Press the button of ON/OFF (7) , to power on the appliace.
Press the button of OSCILLATION (6), appliance will swing from Left to Right.
REMOTE CONTROL
All the function above can be setting by remote control
CLEANING AND MAINTENANCE
Before cleaning the appliance always disconnect the power plug from
the receptacle.
The appliance, the power cord and the power plug should not be immersed
in water or other liquids when you are cleaning them. Clean them with a dry
cloth.
If it is very dirty, the outside of the appliance can be wiped carefully with a
moist cloth and then dried carefully. Make sure that no moisture penetrates
into the interior of the appliance.
Do not use any harsh cleaners, steel brushes, scouring powder or other hard
objects to clean the appliance as these can cause scratches on the surfaces.
Clean the appliance regularly.
Never use solvents, benzene or oil-based cleaners as these can damage the
housing.
Re-tighten visible screw connections on the appliance regularly in order to
ensure that the device is functioning properly.
TIMER (3) to the desired time period (0.5-7.5

Publicidad

loading