Emerson AVENTICS ST6-SM Instrucciones De Montaje página 17

5.2 Labeling and identification
Product identification
The ordered product is clearly identified by the material number. The material
number can be found in these locations:
• As a QR code on the cable flag.
• On the adhesive label on the packaging.
CE mark and UKCA identification
This product complies with the Electromagnetic Compatibility (EMC) Di-
rective 2014/30/EU and its amendments. The product is labeled with CE
and UKCA identification. The declaration of conformity is available on re-
quest.
Please provide the material number and serial number for the correspond-
ing products.
UL approval
This product has been checked and certified to the applicable UL stan-
dards.
5.3 Product overview
5.3.1 Standard components
1
Fig. 1: ST6-SM product overview
1 Physical zero position
3 Mounting screw AF 2.5
5.3.2 Connection variants
1
2
Fig. 2: Connection variants
1 Line ends
5.3.3 Optional: IO-Link connection
The IO-Link communication interface can be used to set up to 8 switching points
and additionally capture and output actuator diagnostic data. See
ing out an actuator diagnosis.
5.4 Function and application
Principle of operation
The product determines the position of a sensor magnet via a row of 2 sensor ele-
ments in the sensor head.
The sensor elements measure the field strength in x-direction and y-direction re-
spectively, which allows axially and diametrically magnetized magnets to be de-
tected.
AVENTICS™ ST6-SM | R412028907-BAL-001-AA | English
2 3 4
2 2 x LED (PWR (green) = power supply,
MR (yellow) = measurement range)
4 Retaining ribs
2 M12 plug
g 8.3.6 Carry-
3
y y
x x
2 1
y y
x x
4
Fig. 3: Principle of operation
1 Sensor element 1
3 Axially magnetized magnet
Detection range
+ 25 mm
Fig. 4: Detection range
1 Detection range, 50 mm
3 Zero point / physical zero position
Position output
The product outputs a linearized position in a detection range of approx. 50 mm
(depending on actuator).
2
32760
Fig. 5: IO-Link position output
1 Zero point / physical zero position
3 Negative positions
5 Piston position
x (axial)
2 Sensor element 2
4 Diametrically magnetized magnet
50
1
32,5
2
3
0
- 25 mm
2 Housing length, 32.5 mm
1
3
0
4
5
-32760
6
2 Positive positions
4 Sensor detection range: -2,500 ...
2,500 digits (IO-Link output), 1 digit
corresponds to 10 μm
6 Sensor position output
y (radial)
17