jp.ik LEAPW503 Manual Del Usuario página 7

4.1 Function keys
Press the following keys to perform the desired function.
Puts your computer
into sleep mode
Decreases the
display brightness
Increases the display
brightness
Switches display
output between
your display,
external monitor (if
connected) and both
Note:
If your software uses some of the function keys to perform dedicated functions,
you can perform the function by pressing "Fn" plus the desired function key.
5. TURN ON/OFF YOUR DEVICE
5.1 Turn ON for the first time
The laptop will require you to do the initial setup, which includes:
• Activate your Windows;
• Sign in to or create your Microsoft account;
• Setup a wireless connection and more.
Please follow the instructions to complete the initial setup.
Mutes/unmutes the
audio output
5.2 Turn OFF your device
Decreases the
volume level
Before turning off your device save all your data. To turn off your device, follow
the next steps:
Increases the volume
level
Disables or enables
the touchpad.
5.3 Sleep mode
While away from your device it is recommended to put it into sleep mode. To
put your device to sleep mode follow the below:
• Close the display panel;
• Press Fn + F2;
• Press the power button briefly one time;
• Open the Start menu and click on Power and then Sleep.
If this is the first time you turn this computer on,
connect the AC adapter and fully charge the battery.
Press the power button (normally 1 to 2 seconds) until
you see the power indicator light up in blue.
• Click the Windows icon in the low-left corner of the Desktop.
Or, press on the Windows key in the keyboard;
3 click here
• In the start menu click on the Power icon and select Shut
Down from the power option menu as shown in the image.
2 click here
1 click here
It is recommended that you put your computer to sleep before you move it.
Especially, if your laptop comes with a traditional hard disk, instead of a
modern SSD. Moving your computer while the hard disk is spinning can
sometimes damage the hard disk, causing loss of data.
7