ctechi GT200 Manual Del Usuario página 16

l.LED Light Button
2.DC Output
3.DC Input
4.AC Socket
5.LED Screen
6.Power Button
[[]] iiov
�us
ll0V60Hz
4/HowTo Use
I.Switch/Button Function
1 Power on (open DC and USB functions):
Press and hold the power button for 2 seconds to power on. Turn on the DC and USB
functions at the sarne time. If the system detects that there is no load, the product will
automatically shut down within 3 minutes.
2 Turn on the AC function:
After power on, short press the power button again to turn on the AC function (the AC
icon on the screen lights up at the same time). When the AC output is not in use, short
press the power button to turn off the AC output.
3. Shut down:
Press and hold the power button for 2 seconds to manually shut down.
Combination button:
The power button and light button can form combination button. It can be valid for a
long time after the key combination is set.
B
S0Hz/60Hz
[ cJ t]
7.QC3.0 Port
8.USB-C Port
9.Air Outlet
10.LED Light
11.Air Inlet
EU
220V S0Hz
�
1 �
CN
220V 50Hz
13
UK
220V S0Hz
0
0]
AU
220V 50Hz