ctechi GT200 Manual Del Usuario página 18

4.DCoutput
1. Two DC5521 (diameter 5.5mm) 12V interfaces provide SA (single port maximum lOA)
output current, and according to the external device intelligence The maximum current
can be distributed to ensure the most suitable current to power the device.
2. Each DC5521 port can be connected to a cigarette lighter output (power requirement
does not exceed 120W).
Protection mode (DC output)
Short circuit protection
When the external equipment is short-circuited, the machine starts the automatic
protection function, and the DC stops supplying power to the output of the equipment
at this time. Short circuit exclusion.After that, short press the power button to reset and
restart the machine to restore the normal operation of the DC.
5.ACoutput
1. Short press the power button to enter AC mode. Connect the power plug of the AC
appliance to the AC outlet of the machine to power the device.line power supply.
2. Please ensure that the power of the connected AC appliance does not exceed 240W.
3. When the charging or discharging power of this product is too large and the internal
temperature of the host is greater than or equal to 60'C, the air cooling system will
automatically start. The air cooling system will stop automatically.
4. When Sleep mode is on and the product is no-load or the total DC load power is less
than lOW, or when the AC actual load power is less than lOW, the product will go to sleep
after 8 hours.
Protected mode (AC output)
1. This product is designed with protection functions such as under-voltage protection,
overload protection, short-circuit protection, and over-temperature protection. It adopts
double isolation circuit, which is safe, reliable and efficient.
2. When the machine is overloaded, over-temperature or short-circuited, the AC icon on
the screen flashes, and then the machine automatically shuts down to ensure safety.
15