ctechi GT200 Manual Del Usuario página 20

6/Charge this product
The first icon from the left, 0%-100%, increment or decrement by 1%, cannot be directly
decreased by 2%. While the device is charging, display the current battery level and the
percent sign is always on. While the power station is recharging, the battery percent sign
flashes and the number is always on.
Charge with
adapter
1. DC charging and PD charging can be used at the same time to maximize charging
speed.
2. It takes about 2.3hours(240Wh)/3.0hours(320Wh) to fully charge the machine
using the original power adapter and PD fast charging at the same time.
3. Use PD to charge the device, it can support SV /9V /12V /lSV /20V-3A (maximum
support 60W).
4. This product supports car charging voltage range is 12V/input current 4A.
7/MPPT technology
The product has built-in MPPT (Maxximum Power Point Tracking) technology, which can
be efficiently charged through solar panels. MPPT technology is designed for use in wind
turbines and photovoltaic (PV) solar systems for maximum extraction under all
conditions electricity. Through MPPT technology, the product can compare the output
voltage of the solar panel and the battery voltage in real time, and then intelligently
identify the best power output for charging to maximize the battery charging efficiency.
Charge with
solar panel
17
Charge with
12V car charger