Publicidad
Idiomas disponibles
Idiomas disponibles
Auto-shutdown:
If the AC output is not turned on, it will automatically shutdown after 3 minutes under no
load (current less than 80mA). Press the light button while holding down the power
button, and immediately release the light button, the Auto-shutdown function will turn
on/off(The sleep icon will on/off).
AC frequency switch:
The default is 50Hz. While holding down the power button, press and hold the light
button for 3 seconds, then release the light button to switch to 60Hz, and the same
operation can be switched to 50Hz (50Hz/60Hz on the screen lights up)
2.LED lighting
1. After the power is turned on, click the lighting switch to turn on the LED light board,
and the LED will display the lighting sleep light status . After clicking again , the LED light
is displayed . Press and hold for 3 seconds to turn on the SOS warning light .
2. The LED lights provide lighting for camping, field exploration, etc., and can use the
SOS strobe mode to send out a distress signal in an emergency.
Kind tips!
Do NOT look straight into the light!
3.USB/PD output function
1. The two USB ports on the top of the product support a single output current of up to
3A. Intelligently identify charging equipment and automatically distribute maximum
power Stream provides fast charging. And has automatic compensation function.
2.USB 3.0 is a fast charging interface, compatible with QC3.0, and supports up to 18W
output.
3. The PD transmission port is a two-way transmission interface, which supports up to
60W input and output. At this time, it needs to be equipped with a charging power of
more than 60W. A charging cable with a current of more than 3A is sufficient.
4. When the detection output current of small electrical appliances is ,S:80mA, the
product will automatically shut down within 3 minutes in sleep mode. If you need to
normally open to supply power to small power appliances, please turn off the sleep
mode.
14
Publicidad
