CASO DESIGN MIG 25 Manual Del Usuario página 60

13.6 Quick start
Utilise this function to program the oven for comfortable cooking at 100% microwave
performance. Press the
press the button once, the oven will work for 30 sec., if you press it twice, it works
for 1 min (max 10 minutes). The oven starts automatically.
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.
13.7 De-activation:
In order to interrupt an ongoing cooking program, you can proceed as follows:
Press the button once. The cooking program that is in use will be stopped.
Open the door of the device. The cooking program that is in use will be stopped.
► To continue the interrupted cooking program, press the button
door.
To terminate the interrupted program, press the button
► Before beginning a different cooking process you must delete the display and reset the
system by pressing the button
13.8 Setting the clock
To set the clock on the device, proceed as follows:
 Activating setup mode
Press button
system to the 24 hour system.
 Setting the hours
Turn the control dial Menu/Time until the correct hour is displayed. Press the
button to save the set hour.
 Setting the minutes
Turn the control dial Menu/Time until the correct minute is displayed. Press the
button to save the set time.
button in quick sequence to set the cooking time. If you
Please note
Please note
or by opening the door of the device.
. Press the button once again to switch the oven from the 12 hour
after closing the
a second time.
60