Kreg Jig K5 Manual Del Propietário página 4

3
K5 and K5 Master System Parts
A
Base
Features four holes for securing the jig to a workbench or auxiliary base
B
Drill-guide socket
Accepts all Kreg drill guides: Micro, Standard (included), and HD
C
Toggle handle
Operates workpiece clamping mechanism
D
Clamp assembly
Powerful internal spring applies clamping pressure
E
Ratchet plate
Provides clamp-assembly adjustment
F
Ratchet release
Disengages clamp assembly from ratchet plate
G
Standard drill guid
Features marks for positioning the guide for different workpiece thicknesses
H
Locking pin
Spring-loaded pin locks the drill guide into the drill-guide socket at the selected setting
I
Step bit
Simultaneously drills a pilot hole and clearance hole, forming a bearing shoulder for
the screw head
J
Stop collar
Controls drilling depth
K
Hex wrench
For the stop-collar set screw
L
Stop-collar setting block
Ensures proper positioning of the depth collar on the drill bit
M
Driver bit
#2 square-drive bit 6" (152mm) long
N
Workpiece stop
Stop snaps into keyhole slots in the base
O
Workpiece stop fine-adjustment nut
¼-20 nut fits into hex recess in workpiece stop
P
Knurled nut
Nylon knurled nut acts as jam nut to fix the position of the fine-adjustment screw
Q Fine-adjustment screw
¼-20 x 2 ½" (64mm) nylon bolt threads into nut to provide no-slip fine adjustment
800-447-8638
Parts
e