7
Decommissioning and storage
7.1 Decommissioning
Take the device out of operation by releasing the „ON/OFF button" D in the handle.
Disconnect the device from the power supply.
CAUTION! Risk of burns caused by hot parts!
The „conical nozzle" J and „heat shield" I will remain hot even once the device has been
switched off.
After use, always place the device with the „support stand" F on a even, fireproof sur-
8
face until the hot parts have cooled down (see Figure 8).
7.2 Storage
Once the device has cooled, check whether the 'conical nozzle' J is dirty, and clean with a
cloth or a brush if necessary. Then hang the device on the folded down „support stand" F.
8
Disposal & Legislation
8.1 Environmental protection & disposal of the device
This symbol on the product, user manual or packaging indicates that this product
must not be disposed of in regular household waste at the end of its service life.
The device must be disposed off at a recycling collection point. The materials can
be recycled according to their designations. You will make an important contri-
bution to the protection of our environment by the correct end-of-life product
recycling, material recycling or other form of re-use.
NOTE!
Please check with your local government to find the appropriate disposal point.
8.2 Disposal of packaging
The packaging materials have been selected according to environmentally-suit-
able and disposal-related aspects and are therefore recyclable. Returning the
packaging to the material circulation saves raw materials and reduces the level
of waste.
Please dispose of unwanted packaging materials according to applicable local
regulations.
Technical changes reserved
19