CASO DESIGN SV 400 Manual Del Usuario página 35

 The setup of this unit in non-stationary locations (e.g., boats, airplanes, motor homes)
must be carried out by a qualified electrician, provided they guarantee the
prerequisites for the safe use of the unit.
16.2 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
 Before plugging in the unit, compare the voltage and frequency data on the device's
rating plate (found on the bottom of the unit) with that of your electrical network. This
data must be compatible. If in doubt consult a qualified electrician.
 The use of a multi-plug outlet adapter is not recommended due to fire danger.
 Inspect the power cord for damage and ensure it doesn't run under the unit or over
hot or sharp surfaces.
 The electrical outlet must be protected by a 16A safety cut-out switch.
 The electrical safety of the unit is only guaranteed if it is connected to a properly
installed protective conductor system. in doubt, consult a qualified electrician. The
manufacturer cannot be made responsible for damages due to a missing or
damaged protective conductor.
17 Complete Overview
This chapter provides you with an overview of your device
and explains some of its key features.
17.1 Appliance diagram
1 Panel
2 Screw
3 Stainless steel skirt
35