Publicidad
Idiomas disponibles
Idiomas disponibles
IT
EN
FR
PRODUCT DESCRIPTION
•
The Omnia ULSfan coils have been designed to meet the need to
combine the typical features of a classic radiator - namely reduced
depth and quiet operation - with the ability of a fan coil to air-
condition rooms throughout the year.
•
They can be installed on any system with a 2-pipe system and it
fits with any heat generator even at low temperatures, and thanks
to varied versions and settings, it is easy to pick the ideal solution
for any need.
•
12/10 and 10/10mm galvanised sheet metal structure.
•
Front cover in 10/10 mm galvanised sheet metal with RAL9003
white epoxy powder coating and thermal-acoustic insulation of
15 mm thickness.
•
These fan coils have extremely silent ventilation by using special
tangential fans, which guarantees maximum acoustic comfort.
•
The electric motor is a 3-speed single-phase motor with a
permanently inserted condenser.
•
With copper pipes and aluminium fins, the main coil has female
gas water connections on the left side and the manifolds have air
vents.
•
The coil is not suitable for use in corrosive atmosphere or in
environments where aluminium may be subject to corrosion.
•
The coil has hydraulic connections on the left and is not reversible.
•
With thermostatic regulation, manual changeover or without
regulation for combination with the TXBS, T-TOUCH-S and VMF-
CAUTION
Electrical diagrams, installation and operating instructions for accessories and thermostats are supplied together with the
accessory itself.
For more information contact Aermec.
IMPORTANT INFORMATION AND MAINTENANCE
ATTENTION: the fan coil is connected to the power supply and the
hydraulic circuit. Operations performed by persons who do not have
the required technical skills can lead to personal injury to the operator
or damage to the unit and the surrounding environment.
POWER THE FAN COIL ONLY BY USING SINGLE-PHASE 230 VOLT
•
The fan coil may be permanently damaged if a different electric
power supply is used.
DO NOT USE THE FAN COIL IMPROPERLY
•
The fan coil must not be used to breed, deliver and raise animals.
AIR OUT THE ROOM
•
Periodically air out the room in which the fan coil has been installed; this
is particularly important if the room is occupied by many people, or if
there are gas appliances or sources of odours.
ADJUST THE TEMPERATURE CORRECTLY
•
Ambient temperature should be regulated to ensure maximum
comfort, particularly for the elderly, infants and invalids. Prevent
temperature fluctuations between indoors and outdoors greater than
7 °C during summer.
•
Excessively low temperatures during summer involve higher electrical
consumption.
DIRECT THE AIR FLOW CORRECTLY
•
Air delivered by the fan coil must not be directed onto people. Even
if the air temperature is higher than the ambient temperature, it can
cause a cold sensation and, therefore, discomfort.
DO NOT USE WATER THAT IS TOO HOT
•
Clean the fan coil by using soft cloths or sponges with warm water at
a maximum temperature of 40°C. Do not use chemical products or
12
DE
ES
E2S commands. If VMF-E2S is used, one of the VMF-E0X and
VMF-E19 thermostats must be mounted, which must be installed
on the machine via the KITSV bracket..
VERSIONS:
•
ULSxx: 3-speed motor and is without command;
•
ULSxxC: 3-speed motor and control installed on board
ULS
solvents on any part of the fan coil. Do not spray water on internal or
external surfaces of the fan coil (danger of short circuits).
CLEAN THE FILTER PERIODICALLY (FIG.1 DRAWINGS CHAPTER )
•
Frequent cleaning of the filter will ensure more efficient operation.
•
Check if the filter is excessively dirty. Repeat the operation more
frequently, if required.
•
Clean often and use a suction device to remove accumulated dust.
•
When the filter is clean, reassemble it onto the fan coil by following the
removal procedure in reverse order.
DURING OPERATION
•
Always leave the filter mounted on the fan coil during operation,
otherwise the dust in the air will dirty the surface of the coil.
IT IS NORMAL
•
When in cooling mode, water vapor can come out of the fan coil air
flow.
•
When in heating mode, a slight hissing sound can be heard near the
fan coil. The fan coil may sometimes emit unpleasant odours due to the
accumulation of substances present in the environment (clean the filter
more often, especially if the room is not aired out regularly).
•
During operation, noise and/or a creaking sound may be heard from
inside the device due to the heat expansion of the elements (plastic
and metal), however, this does not indicate a fault and does not cause
damage to the unit unless the maximum input water temperature is
exceeded.
ATTENTION
•
Do not allow the appliance to be used by children or disabled people
without appropriate supervision. Remember that children must not use
the appliance as a toy.
ULS_C
UL_S 2011 - 5217100_04
Publicidad
