Descargar Imprimir esta página

S&P AIRSENS TEMP Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
EN
Intelligent sensor in temperature version. Designed to create direct demand
control ventilation systems based on Indoor Air Quality reading. AIRSENS RF
can be linked with AC and ECOWATT (EC) fans.
AIRSENS RF range are radio transmitters that communicate wirelessly with the
REC.AIRSENS RF receiver (separate accessory). Easy receiver can receive up to 4
AIRSENS RF emitters allowing control of the IAQ from different areas.
SECURITY
Installation must be carried out by a qualified professional. Make sure that the
installation complies with mechanical and electrical national regulations. Once
in service, the appliance must comply with corresponding Directives.
Do not use this device in explosive or corrosive atmospheres.
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved. Children must not play with the
appliance. Cleaning and user maintenance shall
not be made by children without supervision.
INSTALLATION
This device must be installed in a dry environment (IP30), over a flat surface
through fixing points (see Fig.4) and will require a type X installation. Height in-
stallation recommended between 1,5 and 1,8m. At the same time, it is impor-
tant to choose an installation location free of conditions that could influence the
10

Publicidad

loading

Este manual también es adecuado para:

Airsens rf temp