LEGRAND C2G31020 Manual Del Usuario página 6

HDMI® HDBaseT + 3.5mm, USB-A, and RS232 over Cat Audio De-Embedding
Extender Box Receiver - 4K 60Hz
Wiring
Warnings:
Before wiring, disconnect the power from all devices.
•
During wiring, connect and disconnect the cables gently.
•
Steps for device wiring:
1. Connect HDBT OUT port of the transmitter to HDBT IN
port of the receiver via a single Cat 5e/6/6a/7 cable.
2. Connect an HDMI display (e.g. TV, LED/LCD display,
projector, etc.) to HDMI OUT of the receiver.
3. Connect audio devices (e.g. earphone, speaker) to
De-embed and Pass-through ports of the receiver.
4. Connect USB Devices to USB DEVICE of the receiver.
5. Connect the provided power adapter to the receiver,
with PoH function, the receiver can supply power for
the wall-plate transmitter with PD module.
6. Connect video and audio sources to the HDBT
transmitter.
7. Connect a USB Host device to USB port of the
transmitter.
8. Power on all devices.
4
(us)
(us)