Upgrade - LEGRAND C2G31020 Manual Del Usuario

HDMI® HDBaseT + 3.5mm, USB-A, and RS232 over Cat Audio De-Embedding
Extender Box Receiver - 4K 60Hz

Upgrade

This product supports firmware upgrading through RS232 port. Please contact your supplier to get the latest upgrade tool
"Legrand Product Firmware Updater".
Warning: Do not power off the device during upgrading process.
Steps to upgrade the firmware (FW):
1. Set the DIP switch of the device to the position of "MCU".
2. Connect the device to a PC using a USB Type-A to 3-pin phoenix connector cable.
3. Connect the power adapter provided to the device, and power on the device.
4. Click to run the "Legrand Product Firmware Updater" software. The following window will appear on the next page:
7
(us)
(us)