Hepha Trekking 7 Manual Del Usuario página 8

Before First Ride
Before First Ride
1. Adjust the handlebar
STEP 1
Loosen the 2 screws shown in the
STEP 2
picture with an Allen key#5. You
can adjust the handlebars' angle to
the appropriate position suitable
for you. Then you can tighten the
screws to fix the angle.
9
Hold the front wheel between your knees
to see if the angle between the handle-
bar and the front wheel is 90°. If not,
adjust the screws as shown on page 05
(adjust the stem).
Rotate the handlebar up and
STEP 3
down, adjust the handlebar to
your suitable position. Tighten
the four screws using the Allen
key #4.
Adjust the display holder
STEP 4
Loosen the two screws using Allen
key #3, rotate the display holder up
and down to your comfortable
position, then tighten the screws.
Rotate the grips up and down,
STEP 5
adjust the grips to your suitable
position. Tighten the screw using
the Allen key #3.
2. Adjust the saddle height
When properly adjusted, the saddle
STEP 1
should be at hip height, or check if your
knees form a 90° angle at the top of the
pedal motion, straightening out when
your foot reaches the bottom.
Before First Ride
loosen these two
screws and rotate the
display
10