Motorola DLR1020 Guia Del Usuario página 33

9.1.1
Starting Private Reply
This feature allows two people to instantly connect privately after a group transmission. The Top button
is programmed by default as Private Reply.
Procedure:
1 To capture the radio ID of the person currently talking to your group after transmission is over,
press the Top button.
2 To initiate the conversation privately, press the PTT button.
9.1.2
Private Reply Status Indicator
Table 10: Private Reply Status Indicator
Private Reply Status
Private Reply request in
queue (initiated using Top
button press)
Private conversation initi-
ated (using the PTT but-
ton)
4
Private Call notification
Private conversation in
progress
End of private conversa-
tion
9.2
Direct Call
You can call a pre-determined user programmed in the radio privately. The Direct Call feature is
configurable using the Customer Programming Software (CPS).
NOTE: To configure Direct Call feature for the first time in your radio, download the CPS
for free at http://www.motorolasolutions.com/map/en_xa/dlr. Read and upload the radio IDs
identified as "privates" into the CPS. For more information, refer to
Software on page
You have the option to program the Direct Call feature into the Top button, or assign to any radio
channel.
Direct Call Scenario
User A presses the radio Top button to talk directly to User B. User A radio plays voice prompt "Private
<Name>" as programmed in CPS, and the Top button LED indicator starts blinking orange, indicating
that User A is in queue waiting to talk privately to User B.
4
This notification occurs only once in the beginning of the call.
Radio Caller/Recipient
Caller
Recipient
Recipient
Caller and Recipient
Caller and Recipient
57.
Chapter 9 : Special Radio Call Features
Top Button LED Voice Prompt or
Indicator
Blink Orange "Private Reply"
Solid Orange "Private TPT"
Solid Orange
Solid Orange "Private TPT"
Off "Private Over"
Customer Programming
MN003596A01-AB
Tone
"Private"
33