Publicidad
Idiomas disponibles
Idiomas disponibles
If...
If you hear heavy static or in-
terference,
If the Drop-in Charger LED
light does not blink,
If the battery is low,
If low battery indicator is blink-
ing although new batteries are
inserted,
If the battery does not charge
although it has been placed in
the drop-in charger for a while,
Then...
ensure that transmitting and receiving radios are at least five feet
apart.
perform the following actions:
1 Verify that the radio/battery is properly inserted.
2 Check the battery/charger contacts to ensure that they are
clean and charging pin is inserted correctly.
Refer to
Charging with the Drop-In Tray Single-Unit Charger
(SUC) on page
17,
Radio Status on page 28
Battery on page
23.
recharge or replace the battery.
NOTE: Extreme operating temperature may affect bat-
tery life. See
Battery Specifications on page
refer to
Attaching the Battery on page 23
tions on page
15.
perform the following actions:
•
Verify that the drop-in tray charger is properly connected and
corresponds with a compatible power supply. See
with the Drop-In Tray Single-Unit Charger (SUC) on page 17
and
Charging Stand-Alone Battery on page
•
Check the charger LEDs indicators to see if the battery is in
error state.
MN003596A01-AB
Chapter 13 : Troubleshooting
and
Attaching the
15.
and
Battery Specifica-
Charging
17.
71
Publicidad
