Publicidad
Idiomas disponibles
Idiomas disponibles
Intended use
• This appliance is intended to be used in household and simi-
lar applications such as:
- staff kitchen areas in shops, offices and others working en-
vironment;
- farm houses;
- by clients in hotels, motels and other residential type en-
vironment;
- bed and breakfast type environment.
• The appliance is designed only for cooking a variety of food
via heating the suitable cookware. Any other use may lead to
damage of the appliance or personal injury.
• Operating the appliance for any other purpose shall be
deemed a misuse of the device. The user shall be solely liable
for improper use of the device.
Control panel
(Fig.1 on page 3)
1. Function key
2. ON/OFF key
3. Arrows key
4. Function indicators
5. Display panel
Suitable cooking equipment
Suitable
Bottom of
Flat bottom
cookware
(Fig.2 on page 3)
Material
Cookware with iron, cast
iron, magnetic stainless
steel or enamelled iron
bottom.
Diameter of
Between 16 cm and
the bottom
26 cm.
Type of
Cookware with a bottom
cookware
thickness over 1.5 mm.
Note: Using a pan or pot that's not suitable for induction cook-
ing may damage the appliance.
Recommend to use the temperature mode(If included) for cast
iron material of cooking equipment to avoid overheated
Only use pans that are suitable for induction cooking and that
have not been used on any other type of heat source before.
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Operating instructions
• Insert the plug in the wall socket; the red light next to the
"ON/OFF" key will now go on.
• Set the pan of your choice on the cooking surface, bearing the
above mentioned instructions in mind.
• ATTENTION! Make sure that the pans are used according to the
requirement from "Suitable cooking equipment".
• ATTENTION! Do not leave your pan on the appliance while
empty as this may lead to damage to your pans.
• Switch the appliance on by pressing the "ON/OFF" key. If your
pan is suitable for induction, the appliance will go into oper-
ation. The fan and display will be started. The most of recent
selected function will be operating.
ATTENTION! If the appliance beeps after being switched on,
the pan you are using is not suitable for induction or the ap-
pliance is defective. In case of any doubt, always contact the
supplier of your pan!
• Once the appliance is operating, you can program the appli-
ance in one of the following two ways:
- Power level: You can control the performance of the appli-
Not suitable
- Temperature control: you can set the temperature between
Curved, uneven,
rounded bottom
(Fig.3 on page 3)
Cookware with
• If you select power level, select "Power" using the "Function"
ceramic, glass,
key. Now you can set the power required by means of the ar-
copper, bronze, or
row keys.
aluminium bottom.
• If you select temperature control, select "Temp" using the
Less than 16 cm or
"Function" key. Now you can set the required temperature by
more than 26 cm.
means of the arrow keys between 60°C and 240°C in 20°C
Completely closed
increments.
containers or cans.
• After setting the power level or temperature, you can option-
ally to set the timer. You do this by pressing the "Function"
key once more after setting the power level or temperature,
and selecting "Timer". Now you can set the required time in 5
minute increments. The maximum time is 180 minutes.
NOTE: You can use the ON/OFF key to interrupt or reset the
timer.
• This appliance will switch off after the programmed time has
been reached. The display and stage indicators will go off.
Red indicator next to the ON/OFF key will stay on.
• If you do not use the appliance for an extended period, remove
the plug from the wall-mounted electrical socket and remove
the pans from the appliance.
ATTENTION! Allow the appliance to cool off before you touch
it. The glass plate is very hot after use.
NOTE: The function selected is shown by the function indicators.
Power level
Setting power
Power level
Setting power
ance, just as for a gas stove, via power level 1 through 10.
Set the appliance to the default level "5".
60°C and 240°C in 20°C increments. Default setting for the
appliance is 200°C. ATTENTION! The set temperature is
that of the glass plate and not the temperature in the pan!
1
2
500W
1000W
6
7
1400W
1500W
3
4
5
1100W
1200W
1300W
8
9
10
1600W
1700W
1800W
7
GB
Publicidad
