Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning & maintenance
GB
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
8
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problems
Possible cause
The appliance
- Power plug is
does not switch
not connected
ON.
properly with the
electrical outlet.
- Without switch ON
the appliance by
turn ON the knob.
Cooling fan is op-
- This is normal.
erating even after
The cooling fan
continues running
the appliance is
switched to OFF
in Standby mode
mode.
for some time
to cool down all
internal elements.
Error code identification
Error codes
Possible cause
E01
The temperature of the
appliance is too high.
Cooling fan defective.
E02
The temperature of the
cookware is too high.
Possibly, the cookware
becomes empty and
appliance will shut
down for protection.
Damage of tempera-
ture sensor.
E03
The supply voltage
is abnormal. (Supply
voltage is too high or
too low)
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Possible solution
- Check the power
plug to make
sure it is con-
nected properly.
- Switch ON the
appliance by
turning ON the
knob.
- Wait until the
cooling fan stops
rotating.
Possible solution
Unplug the appliance,
remove the cookware,
wait until the appli-
ance is completely
cool down.
Check ventilation slots
on dust and make
sure there is enough
space around the
appliance.
Contact the supplier.
Unplug the appliance,
remove the cookware,
wait until the appli-
ance is completely
cool down.
Contact the supplier.
Make sure that the
appliance is con-
nected to a suitable
electrical power
supply.
Publicidad
