Descargar Imprimir esta página

Wilo BMS Instrucciones De Instalación Y Funcionamiento página 33

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 97
DANGER
Risk of fatal electrical shock!
If used improperly, there is danger of death due to electric shock!
• Never use the control inputs for safety functions.
• Never install the module in non-compatible devices.
4.1
Compatibility of the firmware
The module's full range of functions is only guaranteed for pumps with Wilo-Connectivity Interface:
Pump
Wilo-Stratos PICO
Wilo-Stratos PICO plus
Wilo-Stratos PICO-Z
NOTICE
When the module is installed, the software version of the module can be called up via the
"SW version" menu and is shown on the pump display.
For compatibility with products not listed above, see
www.wilo.de/automation (German), www.wilo.com/automation (English).
5
Product information
5.1
Type key
Example: Wilo-Connect module BMS
Connect module
BMS
5.2
Technical data
Technical data
General data
Ambient temperature
Storage temperature
Protection class
Module mating cycles
Terminal cross-section
Electric circuit
Installation and operating instructions • Wilo-Connect module BMS • Ed.02/2023-10
Comments
with Wilo-Connectivity Interface (model from 2022)
with Wilo-Connectivity Interface (model from 2023)
Function interface
= for Building Management Systems
-10 °C to +60 °C
-30 °C to +70 °C
IP55
Max. 50
Max. 1.5 mm
sleeves)
SELV, galvanically isolated
²
(solid or finely stranded without end
en
33

Publicidad

loading