Descargar Imprimir esta página

Candy RP4 476BWMR/1-S Manual Del Usuario página 70

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
APPLIANCE PAIRING (ON APP)
Download the hOn App on your device by
framing the following QR code:
or by the link:
go.haier-europe.com/download-app
The App is available for devices
running both Android and iOS, both
for tablets and for smartphones.
Get
all
the
details
functions by browsing the App in
DEMO mode.
The frequency of the home Wi-Fi network
has to be set on the 2.4 GHz band. You
can not configure the machine if your
home network is set to the 5 GHz band.
Open the App, create the user profile (or
log-in if it is already created previously)
and pairing the appliance following the
instructions on the device display.
TO ENABLE REMOTE CONTROL
Check that the router is switched on and
connected to the Internet.
Load the laundry, close the door, add the
detergent if it's necessary.
Turn the SMART RING (programme
selection ring) to the REMOTE CONTROL
(Wi-Fi) position
the controls on the control panel will be
disabled.
of the
Wi-Fi
: the door will lock and
Start the cycle using the app. When the
cycle has been completed, turn off the
machine by turning the SMART RING to
the OFF position to unlock the door.
TO DISABLE REMOTE CONTROL
To exit REMOTE CONTROL mode while
a cycle is underway, turn the SMART
RING to any position other than REMOTE
CONTROL
through the OFF. The control panel on
the appliance will be operative once
again, and if the cycle is paused, you will
be able to open the door once the DOOR
LOCKED indicator light switches off.
For safety reasons, in some wash
cycle phases, the door can be
opened only if the level of the water
is below its lower edge and if the
temperature is less than 45°C. If
these conditions are met, wait for the
DOOR LOCKED light to switch off
before opening the door.
With the door closed, turn the SMART
RING to the REMOTE CONTROL (Wi-Fi)
position to control the appliance using the
app once again. If there is a cycle
underway, it will continue.
70
(Wi-Fi),
without
going

Publicidad

loading