Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Wall Mount Installation Diagram
1. Paste the mounting template sticker on the wall. The bottom edge of the mounting
template sticker should be parallel to and about 42.126'' from the ground.
2. Use a power drill with an 0.315'' drill bit to drill a hole into each marker on the
mounting template sticker, then insert a wall plug into each hole.
3. Align the holes on the mount with the holes on the wall. Fasten it to the wall with the
included screws.
Note:
• The wall mount is an optional accessory. You can install it based on your needs.
• The wall mount should be installed on a cool, dry surface with an electrical outlet
nearby. Prior to installing, ensure that there are no electrical wires or pipes in the space
directly behind installment position.
EN
42.126''
7
Publicidad
