Kenwood DMX129BT Guia De Inicio Rapido página 12

Installation Installation
Ñ Supplied accessories for installation
1
3
(3 m)
5
7
(M5 × 8 mm)
9
Ñ Installation procedure
1) To prevent a short circuit, remove the key from the
ignition and disconnect the ¤ terminal of the battery.
2) Make the proper input and output wire connections
for each unit.
3) Connect the wire on the wiring harness.
4) Take Connector B on the wiring harness and connect
it to the speaker connector in your vehicle.
5) Take Connector A on the wiring harness and connect
it to the external power connector on your vehicle.
6) Connect the wiring harness connector to the unit.
7) Install the unit in your car.
8) Reconnect the ¤ terminal of the battery.
9) Press the reset button.
12
2
x1
4
x1
6
(M5 × 6 mm)
x1
8
(2 m)
x6
x1
Installing the unit
Ñ Japanese cars (North America, South
America sales area only)
x1
6 or 7
x1
x6
Ñ Trim plate
1) Attach accessory 1 to the unit.
x1
Car Bracket
6 or 7
1