Kenwood DMX129BT Guia De Inicio Rapido página 8

External Components
External Components
Using external audio/video players
Ñ Starting playback
1
Connect an external component to the AV-IN
input terminal. (P.14)
2
Press the <8MENU> button.
3
Touch [AV-IN].
4
Turn on the connected component and start
playing the source.
Ñ For Video playback
1
When the operation buttons are not displayed
on the screen, touch the display.
1 [ ] : You can adjust image quality in video
screen.
[INITIALIZE] : To clear the adjustment.
✎
NOTE
• When the picture from the rear view camera is
displayed on the AV-IN screen, the picture output
from the Visual Output terminal disappears.
Rear view camera
To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.14)
Ñ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• The first touch removes the Caution, and the
second touch closes the Camera Screen.
8
Learning function of steering
remote
This function is available only when your vehicle
is equipped with the electrical steering remote
controller.
1
Press the <8MENU> button.
2
Touch [
3
Touch [System].
4
Touch [Steering Remote].
5
Touch the function you want to set.
6
Press and hold the steering remote controller
button.
✎
NOTE
1
• You can have the unit learned all buttons at a time.
In that case, press the all buttons one at a time and
after pressing all of them, touch [6] in Steering
Remote Controller Setting screen.
7
Repeat steps 5 and 6 as necessary.
8
Touch [6].
✎
NOTE
• Touch [Initialize] and then touch [Yes] to set all the
settings to the initial default settings.
Reverse with ATT （-20dB)
When the gear is shifted to the reverse (R) position,
the volume of the device is adjusted.
1
Press the <8MENU> button.
2
Touch [
3
Touch [System].
4
Touch [Reverse with ATT].
5
Touch [T] or [U] set to [ON]/[OFF].
✎
NOTE
• The setting value is ON (default)
].
].