Num'axes PIE 1010 Manual De Instrucciones página 25

Cámara de rastreo
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7.3.1.2. Examples - Changing the settings of some common parameters
To change any parameter's setting, always start with the power switch in the TEST position.
After the LCD screen comes on, press the MENU key. First, you will see "Select language",
"Camera settings" and "SMTP/MMS setup" on the LCD screen and "Select language" is
highlighted.
Press OK to enter the "Choisir la langue/Select language" interface, then press
select the language you want to use. Press OK to save the setting and exit.
Choisir la langue
Réglages de l'appareil
Réglage SMTP/MMS
Press
to highlight "Camera settings" and press OK to enter. The first parameter you will
see is "Mode". To change it from its default setting of "Camera" (still photos) to "Video"
(shoot video clips), press the
Mode
Camera
Photo resolution
5M
Video resolution
720P
Images in series
1 photo
Now press the
will take you to "Video length". Try using the
settings for the length of each video clip the camera shoots.
Video length
10s
Beep sound
ON
Set clock
Enter
Fixed time
OFF
Pressing the
Press OK to enter. Press
parameters back to their original factory default settings.
# PIE 1010 – indice A
key to select "Video".
key to move to another parameter in the Menu. Pressing it four times
key several more times will get you to the "Factory setting" parameter.
to highlight OK then press the OK button to restore all
English
Français
Deutsch
Italiano
Mode
Video
Photo resolution
Video resolution
Images in series
1 photo
and  keys to scroll through the range of
Video length
Beep sound
Set clock
Enter
Fixed time
or
5M
720P
20s
ON
OFF
25/88
to

Publicidad

Tabla de contenido
loading

Tabla de contenido