Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING
CARTON
_I, CAUTION:
Be careful of exposed
staples when handhny or disposing _:_{
cartoning
material.
IMPORTANT:
When unpacking
and
assembling
tiller, be careful of exposed
staples when handling or disposing
of
cartoning
material.
1. While holding handle assembly,
cut
cable ties securing
handle assembly
to top frame.
Let handle assembly
rest on tiller.
2. Remove top frame of carton.
3. Slowly ease handle assembly
up and
place on top of carton.
4. Cut down right hand front and right
hand rear corners of carton, lay side
carton wall down.
5. Remove packing
material from handle
assembly.
6. Separate shift rod from handle
assembly.
Shift Rod
ndle
Assembly
INSTALL HANDLE
1. Insert one handle lock (with teeth
facing outward)
in gearcase
notch.
(Apply grease on smooth side of
handle lock to aid in keeping lock in
place until handle assembly
is
lowered into position.)
VIEWED
FROM R.H. SIDE OF TILLER
Handle Assembly
arcase Notch
Handle Lock
2. Grasp handle assembly.
Hold in "up"
position.
Be sure handle lock remains
in gearcase
notch.
Slide handle
assembly
into position.
3.
Rotate handle assembly
down.
Insert
rear carriage bolt first, with head of
bolt on L.H. side of tiller and loosely
assemble
Iocknut.
Loosen Handle Lock
Lever to Move
4. Insert pivot bolt in front part of plate
and tighten.
5. Cut down remaining
corners of carton
and lay panels flat.
6, Lower the handle assembly.
Tighten
nut on carriage bolt so handle moves
with some resistance.
This will allow
for easier adjustment.
7. Place flat washer on threaded
end of
handle lock lever.
8. Insert handle lock lever through
handle base and gearcase.
Screw in
handle lock lever just enough to hold
lever in place.
9. Insert second handle lock (with teeth
inward) in the slot of the handle base
(just inside of washer).
10. Raise
handle assembly to highest
position
and securely tighten handle
lock lever by rotating clockwise.
Leaving handle assembly
in highest
position will make it easier to connect
shift rod.
Flat Washer
Handle Lock
Lever
Gearcase_
Slot _,_
Rear Cartridge
Handle Base
Locknut j
Pivot Bolt
6
Publicidad
