Aiwa CX-NMT320 Manual De Instrucciones página 6

To
position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T-shape and fix its ends to
the wall.
AM
antenna:
Position to find the best possible reception.
To
stand the
AM antenna on a surface
Fix the claw to the slot.
To
mount the surround speakers on the wall
Mount each speaker on a s~ot that can hold its weiaht.
Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
Do not leave objects generating magnetism, such as credit
cards, near the speakers, as these objects may be damaged.
. Do not bring the FM antenna near metal objects or curtain rails.
Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
Do not unwind the AM antenna wire.
/
5-
I
To
connect other optional equipment+ pagezl. I
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
Using the remote control
The instructions in this manual refer mainly to the buttons on the
main unit. Buttons on the remote control with the same names
as those on the main unit can be used as well.
m
If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight.
- Other remote controls are used nearby (those of a television,
etc.).
5
ENGLISH