TREND CAB/JIG/A Instrucciones Originales página 10

WARNING:
a spelch block should be
used to minimise breakout damage in laminated
materials.
WARNING:
do not overtighten clamps.
• Place the jig against the door/drawer in the desired
orientation (Fig. 15) – 10x options
• Ensure the Short and Long Guides are in full contact
with the door/drawer edges (Fig. 16).
• Clamp the jig to the door/drawer in 2 places away from
the drilling area, using non-marring clamps (Fig. 17).
• Drill through the Drill Guide(s) taking care to ensure that
the drill chuck does not strike the jig (Fig. 18).
• Remove clamps taking care to ensure the jig does not
fall.
• Attach handle using suitable handle screws.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as waste.
Packaging should be sorted for environmental-friendly
recycling.
The product and its accessories at the end of its life
should be sorted for environmental-friendly recycling
WARRANTY
This unit carries a manufacturer's warranty in accordance
with the conditions on our website www.trend-uk.com
EN - CAB/JIG/A
-10-